P2P,
What figures did you use for the hover time and climb/descent rates or I guess the question is what figures did you enter to Tower?
If you login through mission
Planner I do believe it tells you the maximum and minimum values you can set.
If you google it you can find the speed in mph.
With regard to the other values MP is your friend here as I stated above it give you the min and max.
Sent from my iPhone using Tapatalk
P2P
Thanks. I found the change for the speed. I don't have MP, I'm using tower to change the parameters. As you know it just has what they are already set to.
Sent from my iPhone using Tapatalk
And I'm sure many people on here are MP resources. I've used it now for over two years and I know it pretty well so any questions ....
I don't think you need to go through the effort of swapping out the Pixhawk just to try the new firmware. Just flash the new firmware on the currently installed Pixhawk. If you don't like it, flash it back to the current version. Swapping out Pixhawks (especially to a defective one) just doesn't make sense to me!Great tread!
As far as I could understand the fw update will flash the Pixhawk only.
As I have a spare Pixhawk (with a misreading barometer), I could use it as a guinea pig and have one Pixhawk with 1.3.1 and one Pixhawk with 1.5.3. Apart from having to disassemble the whole Solo (and then assemble it again), probably reset/recalibrate it, do I have to take anything else in consideration when changing the Pixhawk on Solo?
Any feedback appreciated!
Cool
That's you set for questions from me.
[emoji106]
As it's totally new to me.
I am only posting what I have read up in advance.
I'm a complete novice and don't mind saying so.
Thank you so much for the offer of as I need it.
It's a bit scary if you ask me, as I totally don't know what I'm doing but I think I am going about it correctly.
Backing up first. I mean it was the first thing I did as soon as I connected.
Then just looking but not touching.
[emoji4]
Sent from my iPhone using Tapatalk
I meant that I could have a back up just in case something screws up during update as one member reported in a previous post.I don't think you need to go through the effort of swapping out the Pixhawk just to try the new firmware. Just flash the new firmware on the currently installed Pixhawk. If you don't like it, flash it back to the current version. Swapping out Pixhawks (especially to a defective one) just doesn't make sense to me!
Good to know, but when was that? Recently?P2P - just a remark that 3DR did send me a new Pixhawk when I opened up a ticket with them concerning inaccurate height Solo App showed on landing. Bottomline 3DR have some spare Pixhawks at hand.
Yes, 3DR shipped it a month ago, but it took me several months talking to CS to convince them to send it. Still not sure that this would solve my problem as I did not installed the replacement Pixhawk yet.Good to know, but when was that? Recently?
At least none that weren't of my own doingP2P has probably flown the most (at least from what I've read here) with 1.5.3 and he hasn't yet reported any issues.
We use essential cookies to make this site work, and optional cookies to enhance your experience.