Hello everyone, first post here.
My problem is
Things i have tried to fix the problem:
i have read a ton of posts and cant seem to get this solved. please let me know what i am doing wrong or if you need more info. And thank you in advance.
My problem is
- when i turn the drone on there is no beeps, or sound at all.
- all motor LEDs are solid green, never change color or blink. (even on factory reset)
- 2 small LEDs on main board: green is solid and orange blinks slowly.
- wont connect to controller
Things i have tried to fix the problem:
- factory reset obviously
- pressing and holding ssw button while powering on
- removed sd card from controller and copter, tried installing open solo 3.0.0
- unhooked all motors and turned on to see if one was bad
i have read a ton of posts and cant seem to get this solved. please let me know what i am doing wrong or if you need more info. And thank you in advance.