I have bought and accessory port breakout board and I am attempting to communicate between a Raspberry Pi and the solo with MAVProxy over serial2 on the Solo. I have already connected to the Solo with Mission Planner over the solo wifi. In Mission Planner I have set SERIAL2_BAUD to 57600 and SERIAL2_PROTOCOL to 1(or MAVLink 1). I know I have wired and configured the Raspberry Pi correctly to use its serial interface. I am using a python console version of MAVProxy and I begin the connection with the following commands:
sudo -s
mavproxy.py --master=/dev/ttyAMA0 --baudrate 57600
But this doesn't work since all I am getting back for the heartbeat is link 1 down
I have read through the 3dr dev pages and tons of forum posts for hours and still nothing is working. I could use some help
Oly
sudo -s
mavproxy.py --master=/dev/ttyAMA0 --baudrate 57600
But this doesn't work since all I am getting back for the heartbeat is link 1 down
I have read through the 3dr dev pages and tons of forum posts for hours and still nothing is working. I could use some help
Oly