Solo Gimbal Twitching Issue

[brkrause86]

Hi there,

I am new to flying Solos and when I installed my gimbal for the first time it twitches noticeably during the flight. I was hoping someone can help me diagnose what would be causing this. Here is a video that shows the problem

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[brianuc4]

it twitches noticeably during the flight. I was hoping someone can help me diagnose what would be causing this.

Try not flying full throttle and see if it helps.

 

[just_bruce]

What camera? Did you add the weights?

 

[Maddog]

Definitely not good.
As mentioned before filming should be done at slow speeds- say around 10 MPH.
Wind can have an effect also.

If those aren't factors for you, try motor and prop balancing. There are numerous threads here and videos on you tube.

Also make sure the HDMI cable (the thick one attaching the gimbal to the circuit board) is not touching the gimbal anywhere except where it plugs in. You will probable need to remove the battery tray to see.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

There are a number of videos on YouTube that you may find useful. Just search for "3dr solo".

Let us know if this helps.