Newbie Problems: IPhone: Black Screen & "Waiting for Solo"

Joined
May 25, 2020
Messages
3
Reaction score
0
Age
37
Hello Guys,

Just got a Solo and checked google what to do first.

Because solex is not available for Iphone I got "Sidepilot"
Via Sidepilot I installed OpenSolo 4.0 on the Controller and the Drohne.
Since then the controller screen just shows "Waiting for Solo". 10 Times I restarted both and still the same screen.
One time they found each other and I checked the versions in the settings. Vision 4.0 on the controller and the Drohne was shown.


Secound Problem is that I do not have a live screen.
The Iphone screen is just black. Check the DHMI Plug In. Camera Verison is the latest one.
Checked the gopro settings and set them right.
Still black screen.

A very bad start. So frustrating.

I hope you can give me some good tips and solutions for the problem. If you need some more details because I forgot them just ask.
Sorry if my english is not that good. I am not a native speaker.

Best greetings and stay safe
Cadri
 
Joined
Jan 23, 2016
Messages
37
Reaction score
6
Age
57
Location
San Diego
Hello,
Which camera do you have?
Hero 3&4 (black or silver)?
Did you check both ends of HDMI?
You may have to open controller and remove and re-install micro sd card. There are youtube videos on this task.
 
Joined
May 25, 2020
Messages
3
Reaction score
0
Age
37
Hello,
Which camera do you have?
Hero 3&4 (black or silver)?
Did you check both ends of HDMI?
You may have to open controller and remove and re-install micro sd card. There are youtube videos on this task.
Thx for that advise. Will check both hdmi Ports. The gimbel works correct and the Camp shoots Fotos.
It is a gopro 4 silber

Will check Youtube for sd card reinstall.

Update: checke the gimbel and inside the gimbel was the hdmi cabel not locked.

But can not test it because "waiting for solo"

OK 2. Update:
1. Fixed the Live View problem.
2. Fixed the "waiting for solo" Problem:
- Reinstalled opensolo on the controller
- rebootet,
- paired again
-> works. After some some calibration probs i fixed that to.

Now the new Problem. When I want to Fly and press the Fly Button to start the motors the Drohne just makes the sound "no noooooo" and they dont start.
 
Last edited:

New Threads

Members online

Forum statistics

Threads
12,563
Messages
144,640
Members
14,658
Latest member
jerry chandler