Controller Sticks are dead!

Joined
Sep 1, 2020
Messages
39
Reaction score
0
Age
46
Location
Dallas, TX
I can just arm the motors that’s it.
All of these happened after I upgraded to Open Solo 4 and SidePilot App

why these is happening?
 
Joined
Sep 1, 2020
Messages
39
Reaction score
0
Age
46
Location
Dallas, TX
Hi bud! Yeah I erased all factory stuff and bough me SidePilot, from there I did the copter and controller firmware and installed OpenSolo 4 then after all the reboot I paired the controller. After that I calentated the compass and also the level.

All good until I armed the motors and doesn’t want to accelerate more that idle.

Should I erase the controller to factory and re-install the SidePilot controller file again or should I erase both my 3DR quad and the controller?
 
Joined
Nov 15, 2015
Messages
144
Reaction score
61
Location
Bouldercombe
Website
www.uavs.com.au
If you are doing a reset then do both.
But you have missed a step in the upgrade.
There is also a restore partition upgrade for both that means a factory reset takes you back to OS4 and not the 3DR firmware.
 
  • Like
Reactions: Flyivan
Joined
Sep 1, 2020
Messages
39
Reaction score
0
Age
46
Location
Dallas, TX
I’ll try the restore files, that should be a little faster. I’m doing this today. Let u know
 
Joined
Sep 1, 2020
Messages
39
Reaction score
0
Age
46
Location
Dallas, TX
I’ll try the restore files, that should be a little faster. I’m doing this today. Let u know

Today I went ahead and reinstall all the fresh firmware for the controller and the copter and I’m still getting the same problem. #stickcalibration
 
Joined
Sep 1, 2020
Messages
39
Reaction score
0
Age
46
Location
Dallas, TX
That’s my next plan......question, for that I have to open the 3DR quad and connect via USB right?
 
Joined
Sep 1, 2020
Messages
39
Reaction score
0
Age
46
Location
Dallas, TX
Today I also tried to do the stick calibration using PuTTY on a windows laptop.

Finish the entire process with the remote vibrating and everything but still same problem.

Stick are not calibrated at all
 

New Threads

Members online

Forum statistics

Threads
12,641
Messages
145,160
Members
14,804
Latest member
Rubic0n