Compass not detected (Help)

[warcelo]

Hello, guys.

I was flying with only the Pixhawk compass since I removed the legs on my Solo to fit a 360 camera under it and now I got a GPS with a compass that I want to use.
The GPS is working fine but the compass is not detected, I tried on the I2C 1 interface of the original leg compass and on the I2C 2 interface of the battery BMS.
Is there anything I need to do? I know the SDA and SCK are correct on all my attempts, I'm thinking there is a software mode that I need to do?
Tha compass is the HMC5883L

Thanks!

 

[jonbrotherton]

What GPS/compass unit did you get? Like this?

Here GPS PnP for Solo

Solo GPS UPGRADE! For those of you looking to easily upgrade your stock GPS unit (highly recommended) I have made this Here PnP kit. It includes a Here GPS, proper Cable, and a Mast with all screws needed for mounting. The GPS is a Here V1 which also has an integrated compass. The Cable is...

jonbrotherton.fws.store

 

[warcelo]

It’s this one here:

https://www.amazon.com/gp/aw/d/B08NY9JSZ3?psc=1&ref=ppx_pop_mob_b_asin_title

 

[jonbrotherton]

It’s this one here:

https://www.amazon.com/gp/aw/d/B08NY9JSZ3?psc=1&ref=ppx_pop_mob_b_asin_title

It seems like it would work as long as the wires are correct and it is not disabled in the parameters.

 

[warcelo]

Yes, but it doesn’t work… it’s enabled and I’ve tried both I2C interfaces, doesn’t show up on the Hardware Devices on MissionPlanner