CAM_FEEDBACK_PIN with Green Cube?

[yarrr]

Hoping to use some of the new features in AC3.5.0 on my Solo- particularly enhanced camera trigger logging

However, having trouble identifying the Pixhawk Aux pins on Solo.

Are Pixhawk pins 50-55 available on Solo?

Using ch7 (Mainboard Pin 19) to trigger the camera, and attempted to use ch8 (pin 18) as feedback, but can't figure out how to set this properly in CAM_FEEDBACK_PIN Parameters. Choices are:
-1 Disabled
50 PX4 AUX1
51 PX4 AUX2
52 PX4 AUX3
53 PX4 AUX4(fast capture)
54 PX4 AUX5
55 PX4 AUX6

So the question is, what pin in Solo is equivalent to Pixhawk pin 53?

 

[EarthImage]

Did you ever figure this out? It is also stumping me.

 

[yarrr]

Not exactly. Short answer is I decided to just use the Reach RTK unit with camera logging for the same effect.

Longer answer is that the CAM_FEEDBACK is not possible on Solo without some delicate soldering.

Good luck!