Recent content by vintagedriver

  1. V

    Solo for parts or repair

    Forgot key info! $100 plus shipping
  2. V

    Solo for parts or repair

    Lost interest in this project. Everything pictured is included. Four motors tested and working. 2cw,2ccw. I had it all together and did a short test flight a year or two ago. Problem was I wasn’t getting flight battery telemetry. While all for ESCs seemed to function fine, I determined three of...
  3. V

    Solo motherboard w/Pixhawk $45!!!

    @Perspective I’m down to $60 on eBay and no action yet.
  4. V

    Solo motherboard w/Pixhawk $45!!!

    $50 takes it.
  5. V

    Solo motherboard w/Pixhawk $45!!!

    Am I asking too much? Seems like a reasonable price. Open to offers folks.
  6. V

    Solo motherboard w/Pixhawk $45!!!

    Used board removed from my Solo. Works as it should. Does not include cpu/WiFi module. $45 shipped conus Text for immediate response 3034375916
  7. V

    Solo lights staying Green and battery voltage displaying -1

    Having a similar issue. Turns out 3 if my pods are to blame, even though I can manually start the motors and they seem to function fine. Try removing all 4 pods then power up Solo. If your voltage data now works connect one pod at a time and test again. In my case I believe the voltage regulator...
  8. V

    Battery data port

    What’s crazy to me is the pods all still work. LED’s, ESC, and motors. And I don’t understand why they are interfering with battery data.
  9. V

    Battery data port

    So number 2 pod works on all 4 arms. Seems I’ve damaged 3 esc’s. There is a part that gets hot on all 3 bad esc’s when I apply power. See photo.
  10. V

    Battery data port

    I’m baffled. Removed the pods and got all the data back. Connected each pod one at a time and found the only one that works properly is number 2. Tried all pods on the number two and they all failed. Only the number two pod on number two arm work. All four motors and esc’s work when I manually...
  11. V

    Battery data port

    I triple checked everything. I’m going to remove the pods and see if I get data. If I do I’ll connect one motor at a time. Starting to wonder if it’s the battery. Only have one but I can borrow one from a friend.
  12. V

    Battery data port

    I replaced the main board and Pixhawk last night. I decided to test it before putting the motor pods back in and all my telemetry was back up. Had gps battery voltage, the works. I then put the motors back in and buttoned everything up and now it’s showing 0 voltage and giving me the Solo...
  13. V

    Battery data port

    True. I know motors and esc’s are good. GPS is good. Receiver is good. I found a motherboard with Pixhawk for $75. Fairly confident that should put it back in the air.
  14. V

    Battery data port

    Any chance I may have also damaged the motherboard ?