Recent content by Spawn32

well, FB it's not the only place where dev discussions are going on, it's her : ArduPilot/OpenSolo /Spawn

Build takes 1 and a half hour on a Ryzen 1700x with a ultrafast samsung M.2 SSD, not to bad :) And yes, Pedals2Paddles and the guys Rock...

Hi carpy, Yes i know, since i was involved in asking 3DR nicely if they could release the current kernel to the public, witch Mr Vu Tran did (really hope more will be released in the future) , the one that was public was very old, btw, if you compile the latest master it's newer than 4176d57 ;)...

We where not talking about any source code where we ? you do know what closed "source" means dont you ? That binary is compiled code, and there is a copy of it in every site scan controller out there !! Do you really think it would be sitting right there in the controller available by telnet...

what, no, i was talking about the controller firmware, not the sitescan IOS software :/

Yes i now that :) But when there is a update for the ARM board (screen controller board) part of the controller, a *.bin file is downloaded and placed in a directory on the artoo board, and from there the update is executed, very similar to have the pixhawk is updated :) This binary update file...

Pedals2Paddles, There are probably a update for the controller also, would be interesting to test, have several spare controller's so i could test it :) Must be a firmware feed for it somewhere on the thing they call "the internet" so if we find it we could probably pull the controller update...

pious_greek, wait a second, what's up with your mainboard ? :) That's not the "normal" consumer version, is it one of the prototypes ? or what is going on her :) It has the internal wifi antenna, and also the mainboard usb socket...

The t-motor 2216 900KV V2 is a direct fit, but you must solder the 3 motor wires to the ESC, if you want to go with 11" props you can use the t-motor 2216 800KV V2 :) They are expensive, but it's the best that exists :)

It is connected to one of the other legs on the other side, desolder it and you will find it, it's under the pot, cant remember exactly which pin, and my gimbal is in the solo at the moment, this pot's are the first thing that gets knocked off in a crash and it makes the gimbal shake and do some...

To bad you don't ship outside the US, can even see your products on ebay, just a empty store :/ Regards from Norway :)