Recent content by makatanav

  1. makatanav

    3DR Solo - From Ordinary to DIY Photo Drone

    Part.16-1 FF sensor camera (concept) When you seriously ambitious about that you’re willing to achieve – move from APS-C to FF. Those who are following my 3DR photo drone build, already know that I’m flying APS-C Ricoh GR on static mount with servo Tilt for photography purposes. I wanted to go...
  2. makatanav

    Compass calibration loop

    do you calibrate it outside in an open area?
  3. makatanav

    3DR Solo - From Ordinary to DIY Photo Drone

    Part.15 BMSOne – the universal BMS When my batteries where getting out of juice, I moved to mRo power module mode, as that was the only option available that time. You can read about it on my 12 post - Part.12 Power module mode + 2x Li-ion 9000mAh battery build It was not bad at all, only...
  4. makatanav

    3DR Solo - From Ordinary to DIY Photo Drone

    Part.14 GPS upgrade - from mRo to HERE 1 on mast When I got my 3DR Solo, it was already equipped with mRo GPS chip from previous owner. mRo actually is one of the best GPS available for Solo, HERE little better. About HERE: + it has compass integrated (can get rid of Solo compass in leg), + it...
  5. makatanav

    3DR Solo - From Ordinary to DIY Photo Drone

    I rebuilded the gimbal frame, so this time it attaches where extension board attaches to 3DR Solo But the problem persisted. I was bored with building and testing it, so I ditched the project to return to it later. I think i found flaws, which can be improved: exchange L type arm which holds...
  6. makatanav

    3DR Solo - From Ordinary to DIY Photo Drone

    Part.13-4 Brushless 2-axis gimbal (build, rebuild, test, rebuild, test, ditch) When I first time put together the gimbal from 3D printed parts, i found some flaws: one part needed to be printed longer as I could not balance the camera on horizontal axis, so it would be needed to reprint from...
  7. makatanav

    3DR Solo - From Ordinary to DIY Photo Drone

    in english it would be something like : "don't hold candle under dowry" :)
  8. makatanav

    3DR Solo - From Ordinary to DIY Photo Drone

    As can be seen, i haven' t posted here for a while (almost 2 years), maybe was some how lazy + all that C-19 thing last years, but then @RichWest: Yes I' m still flying my 3DR Solo, yes I'm still improving it, some upgrades are d0ne, and I will keep to update info here 🙏 I have been sharing...
  9. makatanav

    Can gopro be replaced with something else?

    As @Robpower already mentioned- Yes it is, question is what's your purpose. Video/Foto? Action type camera, other camera? Direct compatibility out of the box with 3DR Solo drone and gimbal is only with GoPro up to version 4.
  10. makatanav

    Finally FLIR!

    yes indeed, I'm also slowly moving forward https://drive.google.com/file/d/1yyeFJqRstW0pgVl6LDXhgBqBpWMcrjX6/view?usp=sharing
  11. makatanav

    Finally FLIR!

    yeah, congrats - when you do more, more can be done
  12. makatanav

    BMSone battery mod

    info about cell voltage is available under telemetry on left side
  13. makatanav

    BMSone battery mod

    Using BMSOne battery mod actually is the only easiest way if you want using batteries larger than 5200mAh
  14. makatanav

    Please post your flight time with bigger, standard, or self-built batteries.

    you can read through this thread, there was plenty of information - 3DR Solo with LiIon 9000mAh battery | up to 30min flight time from the thread: "So for 10% more weight the Solo consumes 16% more energy"
  15. makatanav

    Please post your flight time with bigger, standard, or self-built batteries.

    adding 4 more cells, will add extra weight and result not in so much time increase