Recent content by Craig Thompson

Hi Josealb, I'm using the Solo Accessory Breakout Board which can be bought here: http://viresity.com/product/3dr-solo-accessory-breakout-board/ It allows the Serial Ports to be accessed without opening up the Solo body. Plus it allows us to swap different connections for our different camera...

Hello Everybody, With the assistance of Joel Newman I was able to get the correct wiring on my 6-pin Molex connector that plugs into the 3DR Solo Accessory Board's Serial-2 slot. I'm now able to get radiometric temperature data on continuous grid JPEG images with telemetry geotag location data...

Hi Joel, Are you able to get Telemetry data on your FLIR Vue Pro images? I think I remember from our chat on DIY Drones website that you were successful in getting the data written to your images. If so, how and in what software program are you viewing the images to check on the telemetry...

Hi Joel, In my photo the big green cable is a Mini-USB spliced to a 10-pin connector which is fed through the gimbal bay hole and connects to the Solo's gimbal wire inside the bay (I know it's hard to see from the photo). This provides the 5v power to the FLIR Vue Pro and connects to its female...

Hello Everyone, I still haven't been able to get the telemetry data from the PixHawk2 autopilot from the Solo to the images on the FLIR Vue Pro R. I've attached some photos displaying the wiring and the Mission Planner settings. I've updated the firmware on the PixHawk2 and have the latest...

Hello Everyone, I have mounted a FLIR Vue Pro R thermal camera core to my 3DR Solo for obtaining still thermal-IR images. The Vue Pro has an Accessory Port cable that is pre-terminated to connect properly with the 3DR PixHawk TELEM 1 port (see attached illustration from Vue Pro user guide)...