sunnysky 880kV X2216

[Dmitry]

Who has changed?
V2216 - V Series - Sunnysky朗宇 Sunnysky Motor 朗宇电机官网

 

[RichWest]

Will be interesting to see if in fact anyone has replaced a motor within a motor pod. Knowing what I know now, why would you choose SunnySky as a replacement motor, why not T-Motors instead?

 

[Dmitry]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Dmitry]

Seen from 1.23

 

[RolandS888]

Who has changed?
V2216 - V Series - Sunnysky朗宇 Sunnysky Motor 朗宇电机官网

Originals are more likely the X2216 as the V2216 dont come in 880kV.
X2216 - X Series - Sunnysky朗宇 Sunnysky Motor 朗宇电机官网

Having said that Id probably go for a slightly lower kv motor (~780) on a APC 10x4.5MR prop.

T-motor have a nice replacement...
MT2216 V2.0 - Professional Series Motors - T-MOTOR
They even have the option of a M6 self tightening adapter for them as well. Might have to look a bit closer at the specs for these.

 

[Maddog]

Will be interesting to see if in fact anyone has replaced a motor within a motor pod. Knowing what I know now, why would you choose SunnySky as a replacement motor, why not T-Motors instead?

What's the difference?

 

[Dmitry]

Prop adapter PA029 and PA030 - M6
PA029 - Prop adapter - T-MOTOR
PA030 - Prop adapter - T-MOTOR
T-MOTOR SERIES MOTORS
MT2216 V2.0 - Professional Series Motors - T-MOTOR

 

[RolandS888]

What's the difference?

Tiger motors are a better quality and of course more expensive, but you get what you pay for.

Sunnysky (and E-Max) are alot cheaper, but dont expect them to last all that long.
When they are new, their thrust/power ratio (ie efficiency) is pretty good though

Bottom line is they are all Chinese made..

 

[Dmitry]

Sunnysky X22 Prop Adapter Set CW / CCW

 

[RolandS888]

Sunnysky X22 Prop Adapter Set CW / CCW

Thats a good find, thanks.

 

[Dmitry]

Where to find SunnySky X2216 KV880 II ?

 

[Dmitry]

Need version for Multicopter Multi-rotor Copter.
Without protruding shaft!

 

[Dmitry]

On ebay this version does not!
I found here SunnySky X2216 KV880 Brushless Motor for Multicopter Multi-rotor Copter Black $25.84 Free Shipping @GoodLuckBuy.com

 

[Dmitry]

And you get to where you're sticking a shafts?

 

[RolandS888]

Correct, they must be the multirotor type, found some here

SunnySky X2216 KV880 II Brushless Motor - MultiRotor Mania

and here

Aliexpress.com : Buy SUNNYSKY X2216 880 1100 1250 1400 1800 KV Outrunner Brushless Motor for Multicopter Quadcopter from Reliable brushless rc boat motor suppliers on FDF | Alibaba Group

 

[Dmitry]

Only such an option, without sticking shafts!
SunnySky X2216 KV880 Brushless Motor for Multicopter Multi-rotor Copter Black $25.84 Free Shipping @GoodLuckBuy.com

 

[Dmitry]

Correct, they must be the multirotor type

SunnySky X2216 KV880 II Brushless Motor - MultiRotor Mania

YES!

 

[Dmitry]

We need 800kv or 880kv? probably 880

 

[RichWest]

Has anyone done a motor swap yet?

 

[jcar]

Correct, they must be the multirotor type, found some here

SunnySky X2216 KV880 II Brushless Motor - MultiRotor Mania

and here

Aliexpress.com : Buy SUNNYSKY X2216 880 1100 1250 1400 1800 KV Outrunner Brushless Motor for Multicopter Quadcopter from Reliable brushless rc boat motor suppliers on FDF | Alibaba Group

Can you still purchase the X2216 with the correct prop shaft to use the stock 3DR props?