Welcome to 3DRPilots.com

Sign up and join the largest 3D Robotics drone community!

Generic Props for IRIS+

Discussion in 'Iris+ Discussion' started by monkeyshines, Mar 21, 2016.

  1. monkeyshines

    Joined:
    Mar 21, 2016
    Messages:
    1
    Likes Received:
    0
    Hey all,

    Anyone using props other than the official 3DR 9.5 x 4.5 self-tighteners?

    This fellow seems to have found that throttle was more efficient with SlowFly 10.5 x 4.5:

    Improving lift on IRIS+ with other propellers

    I ordered some prop nuts for the Phantom because it seems the propeller post on the IRIS+ motors are the same but it tightens up after the first turn and I don't want to force it, thus ruining the motor shaft!!

    Any insight would be great.

    peace

    ms
     
  2. sfstrong

    Joined:
    Aug 29, 2016
    Messages:
    12
    Likes Received:
    0
    Location:
    Murray, Utah
    I have taken some old 3DR 9545 IRIS+ props and popped the nuts off them and used them with [ ACP 9 x 4.7 SFP ] and [Ray corp 10 x 4.5 ]. To use these nuts you have to grind the 2 little bumps on the bottom
    flat and then they seem to work very well.

    Shawn
     
  3. NastyNinjaBear

    Joined:
    Nov 7, 2016
    Messages:
    2
    Likes Received:
    0
    The color on the DJI nuts are backwards for the iris+. The silver goes on the black posts and visa versa. Swap the nuts.

    Also, i followed that guide myself. The props work great.
     
  4. IMP Concepts

    Joined:
    Feb 15, 2016
    Messages:
    52
    Likes Received:
    12
    I have a load of Iris Props for sale.