Recent content by Nazgul

Check the inside cables ( gimbal video and data ) change the position NOT to touch the gimbal .

What software do you use to stabilize video???

I like your work. I try to place the cable in your kind but with double-sided tape some time ago but no results. I noticed that you have the original DATA cable,In my opinion is a very rigid cable ; I have changed the cables with some softer, I removed the protection of pvc.I will try to...

@ Rich West: a picture would be helpful. I wonder how silicon tape look??? This is a very good improvement. I still have a micro vibration on my Solo when I raise or lower flight level or in some case when is in loiter. It is very annoying when I see others that are excellent shooting. I...

Somehow I solved the noise ; one of the screw has fall ( i do not know how) I replace the screw and the noise is gone but first I clean the inside motor hood from dust and the ribon cable with compressed air spray.

What upsets me is that the gimbal is bought in June 2016. Has actively about 5 to 6 flights, the biggest problem is that I go on vacation with broken gimbal. I dot have time to replace the gimbal. I sent a ticket to 3DR and I will se what they says. I can use the gimbal but I can't record with...

@Solo Keith : No, I do not look because I do not whant to lose my warranty. Here is the gimbal when is flying: I notice beside the noise a strange movement when I tilt down and up the camera.

I send I ticket to 3DR. If must I send the link to support stuff to see the problem.

Ok this is the sound recorded with gopro :

Hi guys Today i noticed a sound when Ifly my Solo and I move the camera down 90 degrees. Here is the sound: I will try to add a clip with this soun direct from my GP4 black. Any ideeas why I get this sound?

Yes I knoy about DJI balls , I try it allready and is very short. I find at Hobbyking 2 models and I wait to come. Question: - After you make the 4 holes (1/4" ; 6mm) in Solo balls how was the video ? Thanks

I will try anothers balls but not the 3DR Solo for the moment. After I see what happen I will buy original Solo balls. In Europe the parts that find in online store is propellers, gimbals and battery packs and I must to order from USA or another place. Is expensive shipping costs and custom taxes.

I use the stock HDMI cable, but I combined your mod ( from above) with relish3D mod ( ) for better results, but it still vibrate. I use the moongel and earplugs introduced in damping balls. now I will try other damping balls to see the results. With ribbon HDMI cable I have another issue (...

Hi Rich I made the same mood for my gimbal and the vibration is reduced but not disappeared. I combined your mod with relish 3d mod and is ok but I am not 100% satisfied. I try also the Relish hdmi cable but with my GPH4 black after 10-20 sec. I got black screen; with original 3dr HDMI cable...

Witch software stabilization you use other than prodrenalin. In my opinion Prodrenalin is destroy the video ( I do not know why but is a big diference between original and prodrenalin )